Send us a recent power bill and your address. We estimate what a system would generate on your roof and how much of that you would use yourself, then give you a fixed price in writing.
SAA-accredited installers
Estimates only. Your own figures are worked out from your bills and your roof before you decide.
How we work
No track-record boasts here. These are the things we do on every job.
SAA-accredited installers
Your estimate is built from your own usage and your own roof, and we show you how we got there.
The quote lists every part by brand and model, with STCs already taken off. That is the price you pay.
Panels, inverters and batteries come from the Clean Energy Council approved products list.
We lodge the grid connection application with your distributor and give you the Certificate of Electrical Safety.
Prices
Starting prices for the three jobs we do most. Solar prices are shown after STCs. Your written quote is the final figure.
from $220
single storey, up to 6.6 kW
For a system already on your roof that may not be pulling its weight.
Most homes
from $5,500
installed, after STCs
The size that suits most houses in the inner north.
from $9,000
10 kWh, before any incentive
Worth it for some houses and not others. We check yours first.
All prices are in AUD and include GST. Solar prices are shown after STCs. Roof type, shade equipment and switchboard work can change the price. Your written quote is confirmed before work starts.
How it works
You see the numbers and the price before anyone asks you to sign anything.
One recent power bill tells us how much you use and what you pay. Your address lets us look at the roof and the shade.
We send a layout, an estimate of yearly generation and how much of it you would use, plus a fixed price.
Before you commit, we check the roof, the switchboard and the meter in person. If anything changes the price, you hear it then.
Most systems go on in a day. We set up the monitoring app with you and hand over the certificates and warranties.
What we do
New systems, and looking after the ones already on the roof. Every job is quoted in writing before we start.
from $5,500 installed
A system sized from your bills and laid out for your roof, shade and all.
from $9,000 installed
Store your spare daytime solar and use it at night, if the sums work for your house.
from $220
Find out if your system is making what it should, and get the panels cleaned properly.
from $1,800 installed
When the inverter faults or dies, we find out why and get your panels earning again.
quoted per job
More panels for a house that now uses more power, done so the old system still works.
from $1,900 installed
A home charger set up to fill the car from your spare solar before it buys from the grid.
From customers
“They asked for my bill before they quoted anything, then showed me why 6.6 kW was enough. The other mob wanted to sell me 10. Panels are split east and west because of next door's extension.”
“Our old inverter had been dead for months and we had no idea. Turned out to be a rooftop isolator full of water as well. They sent photos, gave me one price and had it going again that week.”
“I rang about a battery and was told to wait, because we don't export enough in winter yet. Got the car charger instead and it runs off the panels most sunny days. Appreciated the straight answer.”
Questions
Straight answers on cost, savings, shade and timing. If yours is not here, ring us.
A 6.6 kW system starts from around $5,500 installed and usually lands between $5,500 and $7,500, depending on the panels, the inverter and your roof. That is after STCs, which come off the price at the point of sale. Shade equipment such as microinverters, a tiled or steep roof, or switchboard work can add to it. You get a fixed written price before you agree to anything.
It depends on how much power you use during the day, your tariff and your feed-in rate, so we will not promise a dollar figure. Feed-in rates in Victoria are now very low, which means the power you use yourself is what pays. A house with people home in the day does much better than an empty one. Send us a bill and we will work out an estimate for your house and show you the sums.
Often yes, but the design matters. With a standard string system, shade on one panel can pull down the output of the whole string. We use microinverters or panel-level optimisers so each panel works on its own, and we keep panels off the worst-shaded sections. If a roof is too shaded to make sense, we will tell you before you spend anything.
Most houses are installed within two to four weeks of saying yes, once the distributor has approved the connection. A 6.6 kW system usually takes one day to install. After that your electricity retailer updates the meter for solar, which can take a couple of weeks more. We tell you where things are up to at each stage.
Where we work
We know these roofs: narrow blocks, old tiles, terraces, and a big street tree out the front.
Quotes are worked out from your power bills and a roof check, so there is no long sales visit.
Plain advice
Short reads on checking your system, batteries, and what to expect in winter.
Plenty of systems stop quietly and nobody notices until the bill arrives. Here is how to check yours from the ground in five minutes.
A big drop in winter worries a lot of people. In Melbourne it is normal, and here is how to tell a normal drop from a real fault.
For some houses a battery pays its way. For others it never will. Here is the honest maths in plain words, so you can tell which you are.
Send a recent power bill and your address. You get an honest estimate and a fixed price, and no one turns up to pressure you.